Electromagnetic Compatibility Regulations 2016
• The Electromagnetic Compatibility Regulations 2016 supersede the EMC Directive 2014/30/EU which was published in the Official Journal of the EU on 26th of February 2014. Please contact us for information on the changes within the new Electromagnetic Compatibility Regulations 2016.
• The EMC Directive superseded (2004/108/EC) was published in the Official Journal of the EU on 31 December 2004. This directive came into force on 20 July 2007 with a transitional period ending on 20 July 2009.
• The original EMC directive, (89/336/EEC), was enacted in 1989 and came into force on 1 January 1992 with a transitional period ending on 31 December 1995. The directive has been amended by 91/31/EEC and 93/68/EEC.
All electric devices or installations influence each other when interconnected or close to each other, e.g. interference between TV sets, GSM handsets, radios and nearby washing machine or electrical power lines. The purpose of electromagnetic compatibility (EMC) is to keep all those side effects under reasonable control. EMC designates all the existing and future techniques and technologies for reducing disturbance and enhancing immunity.
The Electromagnetic Compatibility Regulations 2016 ensures that electrical and electronic equipment does not generate, or is not affected by, electromagnetic disturbance.
The Electromagnetic Compatibility Regulations 2016 limits electromagnetic emissions from equipment in order to ensure that, when used as intended, such equipment does not disturb radio and telecommunication, as well as other equipment. The Regulations also governs the immunity of such equipment to interference and seeks to ensure that this equipment is not disturbed by radio emissions, when used as intended. The main objectives of the Regulations are to regulate the compatibility of equipment regarding EMC:
- equipment (apparatus and fixed installations) needs to comply with EMC requirements when it is placed on the market and/or taken into service
- the application of good engineering practice is required for fixed installations, with the possibility that competent authorities of Member States may impose measures in instances of non-compliance.
Requirements of the Regulations
• Performance of equipment with regard to all forms of radio interference.
• Basic ‘essential protection’ requirement – not to interfere with other apparatus, not to be interfered with by other apparatus.
The Regulations applies to:
• Any “relevant apparatus”; basically, if EMC performance can be meaningfully measured, then the regulation applies.
• Installations (i.e. an assembly of individual pieces of apparatus brought together on a specific site).
There are some exclusions listed in the Regulations:
• Equipment built or assembled by radio amateurs
• Equipment intended for use in commercial aircraft
• Equipment covered by regulations containing more specific EMC provisions (e.g. automobiles (2004/108/EC)
• Weighing equipment (2004/22/EC)
• Telecommunication apparatus (1999/5/EC)
• The regulation does not recognise lower or upper frequency limits (“d.c. to light”) but in practice standards mainly provide for tests covering a range from 10kHz to 30GHz.
Please refer to the Electromagnetic Compatibility Regulations 2016 for detailed requirements.
Services that we offer as an Approved Body
• Technical File Review:
A Technical File is required in order to comply with the Electromagnetic Compatibility Regulations 2016. We will review your Technical File for conformity to the requirements of the regulations and provide recommendations on any areas requiring further action or improvements.
• Technical File Lodging:
CEM will acknowledge receipt and provide secure storage for 10 years after the date of last manufacture.
• EMC Testing Service:
If required, CEM will arrange for equipment to be tested to ensure that it conforms to the requirements of the EMC Regulations.
Annex II to the Electromagnetic Compatibility Regulations 2016 requires the manufacturer to establish the technical documentation. The technical documents must enable the assessment of the conformity of the appliance with the requirements of the Regulations. The technical documentation should comprise:
• A general description of the apparatus;
• Evidence of compliance with the designated standards, if any, applied in full or in part;
• Where the manufacturer has not applied designated standards, or has applied them only in part, a description and explanation of the steps taken to meet the essential requirements of the Regulations, including a description of the electromagnetic compatibility assessment set out in Annex II, point 1, results of design calculations made, examinations carried out, test reports, etc;
• A statement from the approved body, when the procedure referred to in Annex III has been followed.
The manufacturer or his authorised representative established in the UK is requested to keep copies of the technical documentation for a period of 10 years after the last product was placed on the market.