EMC Directive 2014/30/EU


• The original EMC directive, (89/336/EEC), was enacted in 1989 and came into force on 1 January 1992 with a transitional period ending on 31 December 1995. The directive has been amended by 91/31/EEC and 93/68/EEC.
• The EMC Directive recently superceded (2004/108/EC) was published in the Official Journal of the EU on 31 December 2004. This directive came into force on 20 July 2007 with a transitional period ending on 20 July 2009.
• The new EMC Directive 2014/30/EU was published in the Official Journal of the EU on 26th of February 2014. The new directive came into force on the 18th of April 2016 with no transitional period. Please contact us for information on the changes within the new EMC directive.

All electric devices or installations influence each other when interconnected or close to each other, e.g. interference between TV sets, GSM handsets, radios and nearby washing machine or electrical power lines. The purpose of electromagnetic compatibility (EMC) is to keep all those side effects under reasonable control. EMC designates all the existing and future techniques and technologies for reducing disturbance and enhancing immunity.

The Electromagnetic Compatibility directive ensures that electrical and electronic equipment does not generate, or is not affected by, electromagnetic disturbance.

The EMC Directive limits electromagnetic emissions from equipment in order to ensure that, when used as intended, such equipment does not disturb radio and telecommunication, as well as other equipment. The Directive also governs the immunity of such equipment to interference and seeks to ensure that this equipment is not disturbed by radio emissions, when used as intended.The main objectives of the Directives are to regulate the compatibility of equipment regarding EMC:

  • equipment (apparatus and fixed installations) needs to comply with EMC requirements when it is placed on the market and/or taken into service
  • the application of good engineering practice is required for fixed installations, with the possibility that competent authorities of Member States may impose measures in instances of non-compliance.

Current EMC Directive
Old EMC Directive

Requirements of the Directive

• Performance of equipment with regard to all forms of radio interference.
• Basic ‘essential protection’ requirement – not to interfere with other apparatus, not to be interfered with by other apparatus.

Administrative requirements: 

• Perform EMC testing / assessment
Compile a Technical File
Prepare a Declaration of Conformity
• Put CE Mark on the product


The Directive applies to:

• Any “relevant apparatus”; basically, if EMC performance can be meaningfully measured, then the directive applies.
• Installations (i.e. an assembly of individual pieces of apparatus brought together on a specific site).

There are some exclusions listed in the Directive:

• Equipment built or assembled by radio amateurs
• Equipment intended for use in commercial aircraft
• Equipment covered by directives containing more specific EMC provisions (e.g. automobiles (2004/108/EC)
• Weighing equipment (2004/22/EC)
• Telecommunication apparatus (1999/5/EC)
• Directive does not recognise lower or upper frequency limits (“d.c. to light”) but in practice standards mainly provide for tests covering a range from 10kHz to 30GHz.

Please refer to the EMC Directive 2014/30/EU for detailed requirements.

Services that we offer as a Notified Body

• Technical File Review:
A Technical File is required in order to comply with the EMC Directive 2014/30/EU. We will review your Technical File for conformity to the requirements of the directive and provide recommendations on any areas requiring further action or improvements.

• Technical File Lodging:
CEM will acknowledge receipt and provide secure storage for 10 years after the date of last manufacture.

• EMC Testing Service:
If required, CEM will arrange for equipment to be tested to ensure that it conforms to the requirements of the EMC Directive.

Technical documentation

Annex II to the EMC Directive requires the manufacturer to establish the technical documentation. The technical documents must enable the assessment of the conformity of the appliance with the requirements of the Directive. The technical documentation should comprise:

• A general description of the apparatus;
• Evidence of compliance with the harmonised standards, if any, applied in full or in part;
• Where the manufacturer has not applied harmonised standards, or has applied them only in part, a description and explanation of the steps taken to meet the essential requirements of the Directive, including a description of the electromagnetic compatibility assessment set out in Annex II, point 1, results of design calculations made, examinations carried out, test reports, etc;
• A statement from the notified body, when the procedure referred to in Annex III has been followed.

The manufacturer or his authorised representative established in the European Community is requested to keep copies of the technical documentation for a period of 10 years after the last product was placed on the market.